root@192.168.1.9's password: Last login: Wed Aug 8 00:30:40 2007 from 192.168.1.10 on pts/0 Linux readynas 2.6.17.8ReadyNAS #1 Fri Aug 3 15:30:59 PDT 2007 padre unknown Last login: Wed Aug 8 00:30:40 2007 from 192.168.1.10 readynas:~# dmesg Linux version 2.6.17.8ReadyNAS (root@calzone) (gcc version 3.3.5 (Infrant 3.3.5-1)) #1 Fri Aug 3 15:30:59 PDT 2007 You system is PADRE. ASIC=IT1004 On node 0 totalpages: 32768 Normal zone: 30720 pages, LIFO batch:7 DMA zone: 2048 pages, LIFO batch:0 zlist 0 8030c1d8 zone 8030bf90, name Normal zlist 1 8030c1ec zone 8030bd48, name DMA zlist 2 8030c200 zone 8030bf90, name Normal Built 1 zonelists Kernel command line: root=/dev/ram0 init=/linuxrc rw raid=noautodetect profile=2 kernel profiling enabled (shift: 2) PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 65536 (order: 4, 262144 bytes) Inode-cache hash table entries: 32768 (order: 3, 131072 bytes) Memory: 499200k/524288k available (2624k kernel code, 24848k reserved, 736k data, 96k init, 0k highmem) init_mm.pgd 9f000000 Calibrating delay loop... 160.15 BogoMIPS (lpj=800768) Mount-cache hash table entries: 2048 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 16384k freed NET: Registered protocol family 16 PCI: Failed to allocate mem resource #0:1@0 for 0000:00:17.0 PCI: Failed to allocate mem resource #1:1@0 for 0000:00:17.0 PCI: Failed to allocate mem resource #2:1@0 for 0000:00:17.0 PCI: Failed to allocate mem resource #3:1@0 for 0000:00:17.0 PCI: Failed to allocate mem resource #5:1@0 for 0000:00:17.0 PCI: Failed to allocate mem resource #0:1@0 for 0000:00:17.1 PCI: Failed to allocate mem resource #1:1@0 for 0000:00:17.1 PCI: Failed to allocate mem resource #2:1@0 for 0000:00:17.1 PCI: Failed to allocate mem resource #3:1@0 for 0000:00:17.1 PCI: Failed to allocate mem resource #5:1@0 for 0000:00:17.1 PCI: Failed to allocate mem resource #1:1@0 for 0000:00:17.2 PCI: Failed to allocate mem resource #2:1@0 for 0000:00:17.2 PCI: Failed to allocate mem resource #3:1@0 for 0000:00:17.2 PCI: Failed to allocate mem resource #4:1@0 for 0000:00:17.2 PCI: Failed to allocate mem resource #5:1@0 for 0000:00:17.2 usbcore: registered new driver usbfs usbcore: registered new driver hub NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 0, 16384 bytes) TCP established hash table entries: 16384 (order: 2, 65536 bytes) TCP bind hash table entries: 8192 (order: 1, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1070280003.540:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 4096 (order 0, 16384 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) nbd: registered device at major 43 ======== AOE target on ========== md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 xor engine => SPARC. raid6: int32x1 32 MB/s raid6: int32x2 34 MB/s raid6: int32x4 36 MB/s raid6: int32x8 31 MB/s raid6: using algorithm int32x4 (36 MB/s) md: raid6 personality registered for level 6 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com device-mapper: dm-multipath version 1.0.4 loaded device-mapper: dm-round-robin version 1.0.0 loaded Serial: Padre driver $Revision: 1.2 $ 2 ports ttyS0 at I/O 0x0 (irq = 7) is a padre uart ttyS1 at I/O 0x0 (irq = 8) is a padre uart oprofile: using timer interrupt. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 5 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller md: Skipping autodetection of RAID arrays. (raid=noautodetect) RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 96k freed padre_i2c: module license 'Infrant Technologies, Inc.' taints kernel. padre_i2c: no version for "udiv" found: kernel tainted. TWSI Initialize Loading PASEO LED/BUTTON driver Padre NSPIO setup: 8036f430... No argv, go to default. raid5: xor select to PADRE_RXA. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx padre chip scan,token=1 Scan the padre NSP IO hardware. Need memory for RTEngine 63680 PIO mode on chan 7 DMA mode on chan 0 DMA mode on chan 1 DMA mode on chan 2 DMA mode on chan 3 Padre IDE controller, sata start:1 hda: Flash Card, ATA DISK drive (ATANOEXT) hdc: Maxtor 7Y250M0, ATA DISK drive (ATAEXT) hde: Maxtor 7Y250M0, ATA DISK drive (ATAEXT) hdg: Maxtor 7Y250M0, ATA DISK drive (ATAEXT) hdi: Maxtor 7Y250M0, ATA DISK drive (ATAEXT) ide0 at 0x60000580-0x60000587,0x60000588 on irq 39 ide1 at 0x200-0x207,0x208 on irq 32 ide2 at 0x280-0x287,0x288 on irq 33 ide3 at 0x300-0x307,0x308 on irq 34 ide4 at 0x380-0x387,0x388 on irq 35 Update NSPIO settings 8036f430. hda: max request size: 128KiB hda: 127872 sectors (65 MB) w/0KiB Cache, CHS=999/4/32 hda: hda1 hdc: max request size: 512KiB hdc: use capacity 490234752 sectors (251000 MB) Drive support hpa, still should not change max addr. hdc: 488392704 sectors (250057 MB) w/7936KiB Cache, CHS=30401/255/63 hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 < hdc5 > hde: max request size: 512KiB hde: use capacity 490234752 sectors (251000 MB) Drive support hpa, still should not change max addr. hde: 488392704 sectors (250057 MB) w/7936KiB Cache, CHS=30401/255/63 hde: cache flushes supported hde: hde1 hde2 hde3 < hde5 > hdg: max request size: 512KiB hdg: use capacity 490234752 sectors (251000 MB) Drive support hpa, still should not change max addr. hdg: 488392704 sectors (250057 MB) w/7936KiB Cache, CHS=30401/255/63 hdg: cache flushes supported hdg: hdg1 hdg2 hdg3 < hdg5 > hdi: max request size: 512KiB hdi: use capacity 490234752 sectors (251000 MB) Drive support hpa, still should not change max addr. hdi: 488392704 sectors (250057 MB) w/7936KiB Cache, CHS=30401/255/63 hdi: cache flushes supported hdi: unknown partition table Link to padre IO. RAID disks check: ALL = 22/33/34/56/0/0/0/0, 4 IDE = 22/33/34/0/0/0/0/0, 3 MD = 0/0/0/0/0/0/0/0, 0 RAID rule check result: 0 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 Disk protected mark = 1 x_raid_start: 1,current:0 GOT MEMORY FOR DJ: 128*4k Drive hdc SB at 490221216(-sbs) CURRENT Drive hde SB at 490221216(-sbs) CURRENT Drive hdg SB at 490221216(-sbs) CURRENT Drive hdi SB at 490221216(-sbs) CURRENT x_raid_start: 1,result:0 Boot type/reason: normal/2 This is not P0, no NAND support, bail out. NEON flash: probing 8-bit flash bus CFI: Found no NEON flash device at location zero NEON flash: no partition info available, registering whole flash at once This board is not supported. You can use parm_extport=X module parm. I2C device 1f doesn't exist I2C device 1b doesn't exist LCD device not found X_RAID_START startstop XRAID command = start, flash_cache=0 X_RAID clean shutdown indicator: 0x0. 0 4 4 4 4 0 0 0 0 1 1 1 1 0 1 1 1 1 0 1 1 1 1 0 Update time for sb 1 = 43bbb0fd. Update time for sb 2 = 43bbb0fd. Update time for sb 3 = 43bbb0fd. Update time for sb 4 = 43bbb0fd. recent_ID = 1, select_ID=1, most_ID=4 right_mac=4 Selected sb 1, ctime=43bbb0fd, id=a2006456. Use this image: 1 VERSION/ID : SB=(V:0.1.0) ID= CT:43bbb0fd RAID_INFO : DISKS(TOTAL:4 RAID:4 PARITY:3 ONL:4 WRK:4 FAILED:0 SPARE:0 BASE:0) SZ:0488392704 UT:00000000 STATE:0 LUNS:2 EXTCMD:1 LSZ:0488392702 LOGICAL_DRIVE : 0: B:0000000002 E:0004096000 R:1 O:1 I:1:000000000 DM:f LOGICAL_DRIVE : 1: B:0004096002 E:0484296702 R:4 O:1 I:1:000000000 DM:f PHYSICAL_DRIVE: 0: DISK PHYSICAL_DRIVE: 1: DISK PHYSICAL_DRIVE: 2: DISK PHYSICAL_DRIVE: 3: DISK CURRENT_DRIVE : DISK Need to do drives searching. Find parity drive at 3, chn 3 Total=4; raid=4; ready=0; work=4; failed=0 Check degraded mode, start_pos=1 No drive missing, X_RAID run in opt mode. Change X_RAID running mode from 0 to 1 Update backup SB. X_RAID: recovery thread got woken up ... New = 3, source drives = f, current/active=4/4 hdc: hdc1 hdc2 hdc3 < hdc5 > hde: hde1 hde2 hde3 < hde5 > hdg: hdg1 hdg2 hdg3 < hdg5 > hdi: unknown partition table kjournald starting. Commit interval 5 seconds EXT3 FS on hdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. linked EXT2-fs warning (device hdc1): ext2_fill_super: mounting ext3 filesystem as ext2 Adding 255968k swap on /dev/hdc2. Priority:0 extents:1 across:255968k Adding 255968k swap on /dev/hde2. Priority:0 extents:1 across:255968k Adding 255968k swap on /dev/hdg2. Priority:0 extents:1 across:255968k enable_irq(20) unbalanced from f802048c hdc: cache flushes supported hde: cache flushes supported hdg: cache flushes supported hdi: cache flushes supported Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI Copyright (c) 1999-2005 Intel Corporation. hda: hda1 hdi: unknown partition table EXT2-fs warning (device dm-0): ext2_fill_super: mounting ext3 filesystem as ext2 NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period ehci_hcd 0000:00:17.2: EHCI Host Controller ehci_hcd 0000:00:17.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:17.2: irq 27, io mem 0x5c010000 ehci_hcd 0000:00:17.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v3.0 PCI: VIA IRQ fixup for 0000:00:17.0, from 0 to 11 uhci_hcd 0000:00:17.0: UHCI Host Controller uhci_hcd 0000:00:17.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:17.0: irq 27, io base 0x5c001000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: VIA IRQ fixup for 0000:00:17.1, from 0 to 11 uhci_hcd 0000:00:17.1: UHCI Host Controller uhci_hcd 0000:00:17.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:17.1: irq 27, io base 0x5c001020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected readynas:~# df -k Filesystem 1k-blocks Used Available Use% Mounted on /dev/hdc1 2015824 445104 1570720 23% / /dev/c/c 703779112 440057552 263721560 63% /c readynas:~# df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/hdc1 256000 15329 240671 6% / /dev/c/c 89374720 213526 89161194 1% /c readynas:~# fdisk -l Disk /dev/hda: 4 heads, 32 sectors, 999 cylinders Units = cylinders of 128 * 512 bytes Device Boot Start End Blocks Id System /dev/hda1 1 999 63920 6 FAT16 Disk /dev/hdc: 255 heads, 63 sectors, 30401 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hdc1 1 255 2048000 83 Linux Partition 1 does not end on cylinder boundary: phys=(254, 245, 57) should be (254, 254, 63) /dev/hdc2 255 287 256000 82 Linux swap Partition 2 does not end on cylinder boundary: phys=(286, 212, 56) should be (286, 254, 63) /dev/hdc3 287 30401 241884160 5 Extended /dev/hdc5 287 30401 241884159+ 8e Linux LVM Disk /dev/hde: 255 heads, 63 sectors, 30401 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hde1 1 255 2048000 83 Linux Partition 1 does not end on cylinder boundary: phys=(254, 245, 57) should be (254, 254, 63) /dev/hde2 255 287 256000 82 Linux swap Partition 2 does not end on cylinder boundary: phys=(286, 212, 56) should be (286, 254, 63) /dev/hde3 287 30401 241884160 5 Extended /dev/hde5 287 30401 241884159+ 8e Linux LVM Disk /dev/hdg: 255 heads, 63 sectors, 30401 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hdg1 1 255 2048000 83 Linux Partition 1 does not end on cylinder boundary: phys=(254, 245, 57) should be (254, 254, 63) /dev/hdg2 255 287 256000 82 Linux swap Partition 2 does not end on cylinder boundary: phys=(286, 212, 56) should be (286, 254, 63) /dev/hdg3 287 30401 241884160 5 Extended /dev/hdg5 287 30401 241884159+ 8e Linux LVM Disk /dev/hdi: 255 heads, 63 sectors, 30401 cylinders Units = cylinders of 16065 * 512 bytes Disk /dev/hdi doesn't contain a valid partition table readynas:~# pvdisplay --- Physical volume --- PV Name /dev/hdc5 VG Name c PV Size 230.62 GB / not usable 0 Allocatable yes (but full) PE Size (KByte) 32768 Total PE 7380 Free PE 0 Allocated PE 7380 PV UUID SZWoaR-Te32-QxBp-TYdT-7ft9-t95x-8P3RWz --- Physical volume --- PV Name /dev/hde5 VG Name c PV Size 230.62 GB / not usable 0 Allocatable yes (but full) PE Size (KByte) 32768 Total PE 7380 Free PE 0 Allocated PE 7380 PV UUID JEI6KG-eKuk-AqGS-tN2Q-HOgp-yAt3-NrEgqQ --- Physical volume --- PV Name /dev/hdg5 VG Name c PV Size 230.62 GB / not usable 0 Allocatable yes PE Size (KByte) 32768 Total PE 7380 Free PE 320 Allocated PE 7060 PV UUID r4K0gi-1lL5-GE5r-QB0T-CW52-DqYM-vCYEHh readynas:~# vgdisplay --- Volume group --- VG Name c System ID nas-00-64-56 1136374415 Format lvm2 Metadata Areas 3 Metadata Sequence No 1 VG Access read/write VG Status resizable MAX LV 256 Cur LV 1 Open LV 1 Max PV 256 Cur PV 3 Act PV 3 VG Size 691.88 GB PE Size 32.00 MB Total PE 22140 Alloc PE / Size 21820 / 681.88 GB Free PE / Size 320 / 10.00 GB VG UUID bLvA3R-Fd8H-O0vd-e0wS-oJVn-1gHE-jMqyux readynas:~# lvdisplay --- Logical volume --- LV Name /dev/c/c VG Name c LV UUID 000000-0000-0000-0000-0000-0000-000000 LV Write Access read/write LV Status available # open 1 LV Size 681.88 GB Current LE 21820 Segments 3 Allocation normal Read ahead sectors 1024 Block device 254:0 readynas:~# lsmod Module Size Used by uhci_hcd 27192 0 ehci_hcd 36272 0 e1000 122000 0 padre_nor_flash 3880 0 padre_wb83782d 23696 0 padre_des 4328 0 padre_gmac 68144 0 padre_io 1060224 0 padre_i2c_rtc 8948 0 padre_i2c 15960 2 padre_wb83782d,padre_i2c_rtc readynas:~# lspci -v pcilib: Cannot open /sys/bus/pci/devices 0000:00:17.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Flags: bus master, medium devsel, latency 128, IRQ 27 I/O ports at 5c001000 [size=32] Capabilities: [80] Power Management version 2 0000:00:17.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Flags: bus master, medium devsel, latency 128, IRQ 27 I/O ports at 5c001020 [size=32] Capabilities: [80] Power Management version 2 0000:00:17.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 Flags: bus master, medium devsel, latency 128, IRQ 27 Memory at 000000005c010000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 readynas:~# cat /proc/cpuinfo cpu : Infrant Technologics, Inc. - neon version: 0 fpu : Softfpu ncpus probed : 1 ncpus active : 1 BogoMips : 160.15 MMU : version: 0 LP : HW.FW version: 0.1 FPGA : fpga000000-0 Configuration: 0 AHB arbitraion : 7 CPU id : 0 Switch : 0 ASIC : IT1004 readynas:~# cat /proc/meminfo MemTotal: 499536 kB MemFree: 305888 kB Buffers: 22624 kB Cached: 131536 kB SwapCached: 0 kB Active: 98832 kB Inactive: 92768 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 499536 kB LowFree: 305888 kB SwapTotal: 767904 kB SwapFree: 767904 kB Dirty: 80 kB Writeback: 0 kB Mapped: 54832 kB Slab: 6784 kB CommitLimit: 1017664 kB Committed_AS: 152128 kB PageTables: 2336 kB VmallocTotal: 131008 kB VmallocUsed: 1760 kB VmallocChunk: 128880 kB readynas:~# ps -ef UID PID PPID C STIME TTY TIME CMD root 1 0 1 00:32 ? 00:00:06 init [3] root 2 1 0 00:32 ? 00:00:00 [ksoftirqd/0] root 3 1 0 00:32 ? 00:00:00 [events/0] root 4 1 0 00:32 ? 00:00:00 [khelper] root 5 1 0 00:32 ? 00:00:00 [kthread] root 10 5 0 00:32 ? 00:00:00 [kblockd/0] root 13 5 0 00:32 ? 00:00:00 [khubd] root 41 5 0 00:32 ? 00:00:00 [pdflush] root 42 5 0 00:32 ? 00:00:00 [pdflush] root 43 1 0 00:32 ? 00:00:00 [kswapd0] root 44 5 0 00:32 ? 00:00:00 [aio/0] root 45 5 0 00:32 ? 00:00:00 [cifsoplockd] root 46 5 0 00:32 ? 00:00:00 [cifsdnotifyd] root 91 5 0 00:32 ? 00:00:00 [kvblade] root 92 1 0 00:32 ? 00:00:00 [mtdblockd] root 94 5 0 00:32 ? 00:00:00 [kcryptd/0] root 95 5 0 00:32 ? 00:00:00 [kmpathd/0] root 96 5 0 00:32 ? 00:00:00 [kmirrord] root 108 1 0 00:32 ? 00:00:00 [hotplug-sata] root 133 1 0 00:32 ? 00:00:00 [djsyncd] root 134 1 0 00:32 ? 00:00:00 [djcheckd] root 137 1 0 00:32 ? 00:00:00 [hotplug-gmac] root 492 1 0 00:32 ? 00:00:00 /usr/sbin/sshd root 720 1 0 00:33 ? 00:00:00 noflushd -v -n 15 admin 727 1 0 00:33 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --socket=/var/run/mysqld/mysqld.sock daemon 730 1 0 00:33 ? 00:00:00 /sbin/portmap root 743 1 0 00:33 ? 00:00:00 /sbin/syslogd -m 0 admin 747 727 0 00:33 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --socket=/var/run/mysqld/mysqld.sock admin 748 747 0 00:33 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --socket=/var/run/mysqld/mysqld.sock admin 749 747 0 00:33 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --socket=/var/run/mysqld/mysqld.sock admin 750 747 0 00:33 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --socket=/var/run/mysqld/mysqld.sock admin 751 747 0 00:33 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --socket=/var/run/mysqld/mysqld.sock daemon 766 1 0 00:33 ? 00:00:00 /usr/sbin/atd root 768 1 0 00:33 ? 00:00:00 /sbin/klogd -x -c 4 admin 773 747 0 00:33 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --socket=/var/run/mysqld/mysqld.sock admin 774 747 0 00:33 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --socket=/var/run/mysqld/mysqld.sock admin 775 747 0 00:33 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --socket=/var/run/mysqld/mysqld.sock admin 776 747 0 00:33 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --socket=/var/run/mysqld/mysqld.sock root 781 1 0 00:33 ? 00:00:00 /usr/sbin/inetd admin 790 1 0 00:33 ? 00:00:00 avahi-daemon: running [readynas.local] root 792 1 0 00:33 ? 00:00:00 /usr/sbin/cupsd root 797 1 0 00:33 ? 00:00:00 /usr/sbin/cron root 817 1 0 00:33 ? 00:00:00 /usr/sbin/smbd -D root 824 817 0 00:33 ? 00:00:00 /usr/sbin/smbd -D root 832 1 0 00:33 ? 00:00:00 /usr/sbin/rpc.rquotad root 839 1 0 00:33 ? 00:00:00 /sbin/rpc.statd root 853 5 0 00:33 ? 00:00:00 [nfsd4] root 854 1 0 00:33 ? 00:00:00 [nfsd] root 855 1 0 00:33 ? 00:00:00 [nfsd] root 856 1 0 00:33 ? 00:00:00 [nfsd] root 857 1 0 00:33 ? 00:00:00 [nfsd] root 858 1 0 00:33 ? 00:00:00 [nfsd] root 859 1 0 00:33 ? 00:00:00 [nfsd] root 860 1 0 00:33 ? 00:00:00 [nfsd] root 861 1 0 00:33 ? 00:00:00 [nfsd] root 863 1 0 00:33 ? 00:00:00 [lockd] root 864 5 0 00:33 ? 00:00:00 [rpciod/0] root 866 1 0 00:33 ? 00:00:00 /usr/sbin/rpc.mountd nobody 875 1 0 00:33 ? 00:00:00 proftpd: (accepting connections) root 1166 1 0 00:33 ? 00:00:00 /frontview/bin/monitor_enclosure root 1184 1 0 00:33 ttyS1 00:00:00 /sbin/getty -L ttyS1 9600 vt100 root 1185 1 0 00:33 ? 00:00:00 udhcpc -i eth0 -H readynas -n root 1201 1 4 00:33 ? 00:00:17 /usr/sbin/apache-ssl -f /etc/frontview/apache/httpd.conf root 1209 1 0 00:33 ? 00:00:00 /usr/sbin/raidard root 1211 1 0 00:33 ? 00:00:00 nmbd -D root 1212 1211 0 00:33 ? 00:00:00 nmbd -D root 1219 1 0 00:33 ? 00:00:00 /usr/sbin/upnpd -a 192.168.1.9 root 1222 1 0 00:33 ? 00:00:00 /usr/bin/rsync --no-detach --daemon --config /etc/frontview/rsync/Shares.conf root 1229 1 0 00:33 ? 00:00:00 /usr/sbin/fuppesd root 1231 1229 0 00:33 ? 00:00:00 /usr/sbin/fuppesd root 1232 1231 0 00:33 ? 00:00:00 /usr/sbin/fuppesd root 1233 1231 0 00:33 ? 00:00:00 /usr/sbin/fuppesd root 1234 1231 0 00:33 ? 00:00:00 /usr/sbin/fuppesd root 1236 1 0 00:33 ? 00:00:00 /usr/sbin/wizd root 1237 1236 0 00:33 ? 00:00:00 /usr/sbin/wizd mail 1242 1 0 00:33 ? 00:00:00 /usr/sbin/exim -qff root 1253 1231 0 00:34 ? 00:00:00 /usr/sbin/fuppesd root 1258 492 0 00:34 ? 00:00:00 /usr/sbin/sshd admin 1260 1201 0 00:34 ? 00:00:00 /usr/sbin/apache-ssl -f /etc/frontview/apache/httpd.conf root 1263 1258 0 00:34 pts/0 00:00:00 -bash mail 1318 1242 0 00:39 ? 00:00:00 /usr/sbin/exim -qff root 1344 1263 0 00:41 pts/0 00:00:00 ps -ef readynas:~# dpkg --list Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-=============================================-=============================================-========================================================================================================== ii acl 2.2.23-1 Access control list utilities ii adduser 3.47 Add and remove users and groups ii apache2 2.2.3-4.netgear1 Next generation, scalable, extendable web server ii apache2-mpm-prefork 2.2.3-4.netgear1 Traditional model for Apache HTTPD 2.1 ii apache2-utils 2.2.3-4.netgear1 utility programs for webservers ii apache2.2-common 2.2.3-4.netgear1 Next generation, scalable, extendable web server ii apt 0.5.4 Advanced front-end for dpkg ii at 3.1.8-11 Delayed job execution and batch processing ii attr 2.4.16-1 Utilities for manipulating filesystem extended attributes ii avahi-daemon 0.6.15-2.infrant1 Avahi mDNS/DNS-SD daemon ii base-files 3.0.2 Debian base system miscellaneous files ii base-passwd 3.4.1 Debian Base System Password/Group Files ii bash 2.05b-26 The GNU Bourne Again SHell iU cpp-3.4 3.4.3-13sarge1 The GNU C preprocessor ii cracklib2 2.7-8.5 A pro-active password checker library ii cron 3.0pl1-72 management of regular background processing ii cupsys 1.1.14-5woody12.infrant3 Common UNIX Printing System(tm) - server ii debconf 1.0.32 Debian configuration management system ii debianutils 1.16.2woody1 Miscellaneous utilities specific to Debian. ii diff 2.7-29 File comparison utilities ii dosfstools 2.11-2 Utilities to create and check MS-DOS FAT filesystems ii dpkg 1.9.21 Package maintenance system for Debian ii e2fslibs 1.40.2-1.netgear1 ext2 filesystem libraries ii e2fsprogs 1.40.2-1.netgear1 ext2 file system utilities and libraries ii elvis-tiny 1.4-18 Tiny vi compatible editor for the base system. ii ethtool 1.3-1 Display or change ethernet card settings ii exim 3.35-1woody3 An MTA (Mail Transport Agent) ii file 4.12-1 Determines file type using "magic" numbers ii fileutils 4.1-10 GNU file management utilities ii findutils 4.1.7-2 utilities for finding files--find, xargs, and locate ii flac 1.1.1-5 Free Lossless Audio Codec - command line tools ii fuse-utils 2.6.5-3.netgear1 Filesystem in USErspace (utilities) ii grep 2.4.2-3 GNU grep, egrep and fgrep. ii gzip 1.3.2-3woody1 The GNU compression utility. ii hdparm 5.5-2.padre1 Tune hard disk parameters for high performance ii hostname 2.09 A utility to set/show the host name or domain name ii hotplug 0.0.20030117-7 Linux Hotplug Scripts ii ifplugd 0.26-1 A configuration daemon for ethernet devices ii ifupdown 0.6.4-4 High level tools to configure network interfaces ii ipchains 1.3.10-15 Network firewalling for Linux 2.2.x ii iputils-ping 20020124-3 The ping utility from iputils ii klogd 1.4.1-10 Kernel Logging Daemon ii libacl1 2.2.23-1 Access control list shared library ii libapache2-mod-apreq2 2.08-4.netgear1 generic Apache request library - Apache module ii libapache2-mod-auth-pam 1.1.1-6.1.netgear1 module for Apache2 which authenticate using PAM ii libapache2-mod-auth-sys-group 1.1.1-6.1.netgear1 Module for Apache2 which checks user against system group ii libapache2-mod-perl2 2.0.2-2.4.netgear1 Integration of perl with the Apache2 web server ii libapache2-request-perl 2.08-4.netgear1 generic Apache request library - Perl modules ii libapr1 1.2.7-8.2.netgear1 The Apache Portable Runtime Library ii libapreq2 2.08-4.netgear1 generic Apache request library ii libaprutil1 1.2.7+dfsg-2.netgear1 The Apache Portable Runtime Utility Library ii libattr1 2.4.16-1 Extended attribute shared library ii libblkid1 1.40.2-1.netgear1 block device id library iHR libc6 2.3.2.ds1-22sarge5.infrant1 GNU C Library: Shared libraries and Timezone data iU libc6-dev 2.3.6.ds1-13 GNU C Library: Development Libraries and Header Files ii libcap1 1.10-12 support for getting/setting POSIX.1e capabilities ii libcomerr2 1.40.2-1.netgear1 common error description library ii libcupsys2 1.1.14-5woody12.infrant2 Common UNIX Printing System(tm) - libs ii libdaemon0 0.7-1 lightweight C library for daemons ii libdb1-compat 2.1.3-7 The Berkeley database routines [glibc 2.0/2.1 compatibility] ii libdb2 2.7.7.0-7 The Berkeley database routines (run-time files). ii libdb3 3.2.9-16 Berkeley v3 Database Libraries [runtime] ii libdb4.2 4.2.52-10 Berkeley v4.2 Database Libraries [runtime] ii libdvdread3 0.9.4-5 Simple foundation for reading DVDs ii libevent1 1.1a-1 An asynchronous event notification library ii libexpat1 1.95.8-3 XML parsing C library - runtime library ii libflac6 1.1.1-5 Free Lossless Audio Codec - runtime C library ii libfuse2 2.6.5-3.netgear1 Filesystem in USErspace library ii libgcc1 3.4.3-13 GCC support library ii libgdbm3 1.8.3-2 GNU dbm database routines (runtime version) ii libgdbmg1 1.7.3-27 GNU dbm database routines (runtime version). [libc6 version] ii libgssapi2 0.11-1 A mechanism-switch gssapi library ii libid3tag0 0.15.1b-4.1 ID3 tag reading library from the MAD project ii libident 0.22-2 simple RFC1413 client library - runtime ii libiw27 27-2 Wireless tools - library ii libjpeg62 6b-5 The Independent JPEG Group's JPEG runtime library ii libkrb53 1.4.4-7etch1 MIT Kerberos runtime libraries ii libldap2 2.0.23-6.3 OpenLDAP libraries. ii liblockfile1 1.03 NFS-safe locking library, includes dotlockfile program ii libmad0 0.14.2b-3 MPEG audio decoder library ii libmagic1 4.12-1 File type determination library using "magic" numbers ii libmysqlclient15off 5.0.24a-3.infrant1 mysql database client library ii libncurses5 5.4-4 Shared libraries for terminal handling ii libnfsidmap2 0.18-0 An nfs idmapping library ii libntfs-3g5 1.710-1.netgear1 ntfs-3g filesystem in userspace (FUSE) library ii libogg0 1.1.2-1 Ogg Bitstream Library ii liboggflac1 1.1.1-5 Free Lossless Audio Codec - runtime C library (ogg) ii libpam-modules 0.72-35 Pluggable Authentication Modules for PAM ii libpam-runtime 0.72-35 Runtime support for the PAM library ii libpam0g 0.76-22 Pluggable Authentication Modules library ii libpcre3 6.7-1.netgear1 Perl 5 Compatible Regular Expression Library - runtime files ii libperl5.8 5.8.8-7.infrant2 Shared Perl library ii libpopt0 1.6.2-7 lib for parsing cmdline parameters ii libreadline4 4.3-11 GNU readline and history libraries, run-time libraries ii librpcsecgss3 0.14-2 allows secure rpc communication using the rpcsec_gss protocol ii libsasl7 1.5.27-3.0.1 Authentication abstraction library. ii libsnmp-base 5.1.2-6.2 NET SNMP (Simple Network Management Protocol) MIBs and Docs ii libsnmp-perl 5.1.2-6.2 NET SNMP (Simple Network Management Protocol) Perl5 Support ii libsnmp5 5.1.2-6.2 NET SNMP (Simple Network Management Protocol) Library ii libsqlite3-0 3.3.17-1.netgear1 SQLite 3 shared library ii libss2 1.40.2-1.netgear1 command-line interface parsing library ii libssl0.9.6 0.9.6c-2.woody.6 SSL shared libraries ii libssl0.9.7 0.9.7e-3sarge1 SSL shared libraries ii libstdc++5 3.3.5-13 The GNU Standard C++ Library v3 ii libtag1c2a 1.4-4.infrant1 TagLib Audio Meta-Data Library ii libusb-0.1-4 0.1.10a-9.sarge.1 userspace USB programming library ii libuuid1 1.40.2-1.netgear1 universally unique id library ii libwrap0 7.6-9 Wietse Venema's TCP wrappers library ii libxml2 2.6.16-7 GNOME XML library ii linux-kernel-headers 2.6.18-7 Linux Kernel Headers for development ii login 20000902-12 System login tools ii logrotate 3.5.9-8 Log rotation utility ii lsb-base 3.1-23.1 Linux Standard Base 3.1 init script functionality ii lvm-common 1.5.5 The Logical Volume Manager for Linux (common files) ii lvm10 1.0.4-4 The Logical Volume Manager for Linux ii madplay 0.14.2b-3 MPEG audio player in fixed point pi mailx 8.1.2-0.20020411cvs-1 A simple mail user agent. ri make 3.79.1-14 The GNU version of the "make" utility. ii makedev 2.3.1-83.netgear1 creates device files in /dev ii mawk 1.3.3-8 a pattern scanning and text processing language ii mime-support 3.18-1.3 MIME files 'mime.types' & 'mailcap', and support programs ii modutils 2.4.15-1 Linux module utilities. ii mount 2.11n-7.padre1 Tools for mounting and manipulating filesystems. ii mt-daapd 1.0.0-svn-1586.infrant1 iTunes-compatible DAAP server ii mysql-client-5.0 5.0.24a-3.infrant1 mysql database client binaries ii mysql-common 5.0.24a-3.infrant1 mysql database common files (e.g. /etc/mysql/my.cnf) ii mysql-server-5.0 5.0.24a-3.infrant1 mysql database server binaries ii nas-upnp 1.2.1a-1.padre2 Infrant uPnP NAS daemon ii ncftp 3.1.3-1 A user-friendly and well-featured FTP client. ii ncurses-base 5.2.20020112a-7 Descriptions of common terminal types ii ncurses-bin 5.2.20020112a-7 Terminal-related programs and man pages ii net-tools 1.60-4 The NET-3 networking toolkit ii netatalk 2.0.3.netgear7 AppleTalk user binaries ii netbase 4.07 Basic TCP/IP networking system ii netkit-inetd 0.10-9 The Internet Superserver ii nfs-common 1.1.0-11 NFS support files common to client and server ii nfs-kernel-server 1.1.0-11 support for NFS kernel server ii nis 3.9-6.1 Clients and daemons for the Network Information Services (NIS). ii noflushd 2.7.5-2.infrant3 allow idle hard disks to spin down ii ntfs-3g 1.710-1.netgear1 read-write NTFS driver for FUSE ii ntpdate 4.1.0-8 The ntpdate client for setting system time from NTP servers. ii nut 2.0.5-0.netgear2 The core system of the nut - Network UPS Tools ii openssl 0.9.6c-2.woody.6 Secure Socket Layer (SSL) binary and related cryptographic tools. ii passwd 4.0.3-31sarge9 change and administer password and group data ii pciutils 2.1.11-15 Linux PCI Utilities ii perl 5.8.8-7.infrant2 Larry Wall's Practical Extraction and Report Language ii perl-base 5.8.8-7.infrant2 The Pathologically Eclectic Rubbish Lister ii perl-modules 5.8.8-7.infrant2 Core Perl modules ii portmap 5-2 The RPC portmapper ii procps 3.2.1-2 The /proc file system utilities ii proftpd 1.3.0-9.infrant4 Versatile, virtual-hosting FTP daemon ii psmisc 20.2-2.1 Utilities that use the proc filesystem ii quota 3.14-4.infrant1 implementation of the disk quota system ii raidtools2 0.90.20010914-15 Utilities to support 'new-style' RAID disks ii rsync 2.6.8-2.infrant1 fast remote file copy program (like rcp) ii samba 3.0.25b.netgear4 a LanManager-like file and printer server for Unix ii samba-common 3.0.25b.netgear4 Samba common files used by both the server and the client ii sed 4.1.5-1.netgear1 The GNU sed stream editor ii shellutils 2.0.11-11 The GNU shell programming utilities. ii smartmontools 5.33+5.34cvs20050802-3 control and monitor storage systems using S.M.A.R.T. ii smbclient 3.0.25b.netgear4 a LanManager-like simple client for Unix ii smbfs 3.0.25b.netgear4 mount and umount commands for the smbfs (for kernels >= than 2.2.x) ii snmpd 5.1.2-6.2 NET SNMP (Simple Network Management Protocol) Agents ii ssh 3.4p1-1.woody.3 Secure rlogin/rsh/rcp replacement (OpenSSH) ii sudo 1.6.6-1.1 Provides limited super user privileges to specific users. ii sysklogd 1.4.1-10 System Logging Daemon ii sysvinit 2.84-2woody1 System-V like init. ii tar 1.14-2.2 GNU tar ii tcpd 7.6-9 Wietse Venema's TCP wrapper utilities ii textutils 2.0-12 The GNU text file processing utilities. ii timeout 1.07-9 Run a command with a time limit. iU tzdata 2007b-1 Time Zone and Daylight Saving Time Data ii udhcpc 0.9.8-6.padre2 very small DHCP client ii udhcpd 0.9.8-6.padre2 very small DHCP server ii util-linux 2.11n-7.padre1 Miscellaneous system utilities. ii wget 1.9.1-8.padre1 retrieves files from the web ii winbind 3.0.25b.netgear4 service to resolve user and group information from Windows NT servers ii wireless-tools 27-2 Tools for manipulating Linux Wireless Extensions ii zlib1g 1.2.2-4.sarge.2 compression library - runtime readynas:~# readynas:/var/log# smartctl --test=long /dev/hdi smartctl version 5.34 [sparc-unknown-linux-gnu] Copyright (C) 2002-5 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 107 minutes for test to complete. Test will complete after Wed Aug 8 02:32:32 2007 Use smartctl -X to abort test. readynas:/var/log# smartctl --all /dev/hdi smartctl version 5.34 [sparc-unknown-linux-gnu] Copyright (C) 2002-5 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Maxtor MaXLine Plus II Device Model: Maxtor 7Y250M0 Serial Number: Y63CCKKE Firmware Version: YAR51HW0 User Capacity: 251,000,193,024 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Wed Aug 8 00:45:41 2007 JST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: ( 363) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 107) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 181 179 063 Pre-fail Always - 25091 4 Start_Stop_Count 0x0032 252 252 000 Old_age Always - 2635 5 Reallocated_Sector_Ct 0x0033 253 001 063 Pre-fail Always In_the_past 0 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 250 230 187 Pre-fail Always - 64963 9 Power_On_Minutes 0x0032 233 233 000 Old_age Always - 408h+41m 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 147 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 65 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 2574 196 Reallocated_Event_Count 0x0008 001 001 000 Old_age Offline - 2556 197 Current_Pending_Sector 0x0008 253 001 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0008 253 001 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 251 000 Old_age Always - 172 202 TA_Increase_Count 0x000a 253 143 000 Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 248 180 Pre-fail Always - 0 204 Shock_Count_Write_Opern 0x000a 253 161 000 Old_age Always - 0 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 146 144 000 Old_age Offline - 0 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. readynas:/var/log#